STC-3008 Dual Digital Temperature Controller Two Relay Output 12V 24V 220V / 12V/24VThermoregulator Thermostat With Heater Cooler
-
Independent Dual-way temperature controller.
-
Heating or cooling control.Red and blue LED display.
-
All parameters setting can be saved after short circuit.
-
Directly power output.
-
Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other temperature-controlled system.
-
Power Supply:12VDC、24VDC、110V-220V AC
-
Temperature control range:-50~120°C
-
Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)
-
Measurement accuracy: ±0.1°C
-
Control accuracy: 0.1°C
-
Refresh rate: 0.5S
-
Sensor1 2: NTC10K sensor each
-
Output1 2: Max 10A directly output each
-
Environmental requirements: -10-60°C , humidity 20%-85%RH
-
Size:100mm(L)*55mm(W)*32mm(Depth)
-
Cutting size: 75(L)mm*55(W)mm M3 screw hole
-
Power consumption: Static current: ≤35MA,attract current: ≤65MA
-
The relay of this product is 10A. To ensure long-term use, please use a resistive load less than 5A and an inductive load less than 1.25A
Operation Instruction :
- You can set different start temperature and stop temperature in controller 1 and controller 2.
- Cooling mode:
- When set start temperature ≥ stop temperature, the
- controller will work in cooling mode.You can use cooler
- as load. For example, set start temperature 35℃,stop
- temperatre 32 ℃ .Cooler work when temperature ≥
- 35℃,Cooler stop when temperature≤32℃
- Heating mode:
- When set start temperature ≤ stop temperature, the
- controller will work in heating mode.You can use heater
- as load. For example, set start temperature 45℃,stop
- temperatre 60 ℃ .Heater stop when temperature ≥
- 60℃,heater work when temperature≤45℃