Specification:
1. 100% brand new and high quality!
2. Swimming pool, sauna and spa essential tool.
3. It is designed for easy use and is easy to store.
4. Electronically tests PH and chlorine of water,eliminating messy chemicals,charts and guess work.
5. Ideal tool for water PH and C12 value of a simple measurement
6. No chemical ingredients, no need to re guessing measure
7. Safe levels of chlorine measuring range: 1.2-1.7ppm
8. PH value within the safety level measuring range: 7.2-7.8
9. Battery: Use 1 AA battery(not included)
Package Includes:
1x Electronic Swimming Pool Spa Water PH CL2 Chlorine Tester PC-101
Chlorine test - setpoint:
Before first use, please follow the order of the test pool water or spring water to tester adjustment:
1. Conventional liquid test tools swimming pool water or spring water for testing;
2. Record the chlorine reading to spare (1.5PPM);
3. PH without the need for adjustment. Looking for tester adjustment points:
A. In the grip of the battery compartment into a AA 1.5 V battery (positive side up).
B. A hand holding tester, the other holding the test stick.
C. The metal rod into the water after cleaning to the black position.
D. water and gently stir with a metal rod.
E. metal bar when kept in water, and the knob on the front table to CL direction can not be adjusted to move up. Then slowly recall right until the pointer to the conventional liquid test tools to the results measured position (eg 1.5).
F. The test bar removed from the water, be careful not to move the knob. Pointer will slide to the right, in a letter between A and E stop. The letter that is the adjustment point.
Note: Before each test chlorine, you must first table raised "setpoint."
Test pH: swimming pool water or spring water is recommended chlorine content of 7.2 to 7.8
A) to make the test bars to stay in the water, turn the knob beeps (you must remove the battery when reading pH value) was adjusted to pH direction.
B) Wait until the pH reading after pointer stop swinging.
C) gently dry test stick, the tester inserted into the slot next to store it.
Test chlorine content:
swimming pool water or spring water is recommended chlorine content of 1.2 to 1.7ppm
A) Move the pointer adjusted "setpoint" position.
B) A hand holding tester, the other holding a test rod, metal rod into the water to the black position. Wait until the pointer stops after reading swing.
C) to make the test bars to stay in the water, continue according to the instructions pH value of the test.
Storage method:
To extend the life of Pool Tester PC-101 and to ensure accurate measurement,
1, when not in use, place the knob to the off position (PH direction to move up can not be adjusted).
2, put in a cool, dry place, away from direct sunlight.
3. Do not test rod dipped into the pool of water and other liquids in addition to the thermal waters.
4, periodically check the battery power is sufficient - The tester uses an "AA" 1.5 V alkaline batteries
